-
Mick commented on this post about 6 months agoContinuing work on the Chassis Side Rails, the mid chassis sections in the photos will be completed during the week. Once the top and bottom flanges are tacked into place the flanges will be trimmed to follow the contour of the outside web with the overall width of each rail being 35mm. Next week I plan to start work on the forward section of the chassis that support the front springs. I am resisting doing any substantial welding until the whole frame is tacked together.
Post is under moderationStream item published successfully. Item will now be visible on your stream.
Aussie Cyclekarts acknowledges the Traditional Custodians of country and their connections to land, sea and community.
We pay respect to Elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.
The Cyclekart Club of Australia Incorporated